Flexoptix

Flexoptix is an implementation of Flexoptix’ online functionalities “Power Meter and Source”, “Transceiver Reconfiguration” and “Distance Analyzer” for mobile devices running on Android and supporting USB OTG. Simply connect your Flexbox via USB and start the app.

You can reconfigure any Flexoptix transceiver to your desired configuration, measure your optical fiber's distance using a microOTDR transceiver, as well as measure any Flexoptix transceiver’s receive level or - by activating its laser - transmit power level.

Also it is possible to set up electric loops which allows you to fully test and analyse your link. The TX and RX high speed lanes of each transceiver slot (SFP+, XFP and QSFP+) of each Flexbox are looped. the PCB layout has been tested for data rates of 10G (SFP/SFP+) as well as 4x10G (QSFP+).

Features:

• Full support for Flexboxes V2 and V3

• SFP/SFP+, XFP and QSFP+ support with Flexbox V4

• Compatible with transceiver types SFP/SFP+, XFP and QSFP+

• Reconfigure your transceiver to any compatible configuration

• Read out latest current, voltage and temperature values

• Plot receive and transmit power levels to a graph

• Enable and disable the lasers for detailed measurements

• Use Power Meter and Source as well as our OTDR feature offline

• Log your transceivers' measured RX and TX power level values and export them to .csv or .json files on your device

• Measure an optical fiber's distance using a microOTDR SFP transceiver

Hint: You will need a USB OTG cable.

To get a Flexbox, go to www.flexoptix.net

Flexoptix requires the following permissions:

• Network communication: Full network access

• Network communication: View network connections

• Network communication: View Wi-Fi connections

(These permissions are necessary to communicate with our servers and to enable/disable the offline mode)

• Storage: Modify or delete the contents of your external storage

• Storage: Read the contents of your external storage

(These permissions are necessary to export the Power Meter and Source logs to your device)

Supported Android versions:

• min 4.1 (JellyBean) or above

Flexoptix是Flexoptix的在线功能“功率计和源”，“收发器重新配置”和“远程分析仪”在Android上运行，支持USB OTG移动设备的实现。只需通过USB连接您的Flexbox的和启动应用程序。

您可以重新配置任何Flexoptix收发器所需配置，使用microOTDR收发器测量您的光纤的距离，以及任何措施收发Flexoptix的接收电平或 - 激活其激光 - 发射功率水平。

此外，也可以设置电回路，让您充分测试和分析你的链接。每个收发器插槽每个Flexbox的的TX和RX高速车道（SFP +，XFP和QSFP +）的循环。在PCB布局已经过测试，10G（SFP / SFP +）以及4x10G（QSFP +）的数据传输速率。

特点：

＆公牛;对于Flexboxes V2和V3完全支持

＆公牛; SFP / SFP +，XFP和QSFP +与Flexbox的V4支持

＆公牛;与收发器类型兼容SFP / SFP +，XFP和QSFP +

＆公牛;重新配置收发器到任何兼容的配置

＆公牛;读出最新的电流，电压和温度值

＆公牛;积的接收和发送功率电平给一个图

＆公牛;启用和禁用详细的测量激光器

＆公牛;使用功率计和来源，以及我们的OTDR功能离线

＆公牛;登录您的收发器“测量的RX和TX功率电平值，并将其导出为.csv或设备上以.json文件

＆公牛;测量使用microOTDR SFP收发器光纤的距离

提示：您将需要一个USB OTG线。结果

为了得到一个Flexbox的，去www.flexoptix.net

Flexoptix需要以下权限：

＆公牛; 网络通讯：的完全网络访问

＆公牛; 网络通讯：查看网络连接

＆公牛; 网络通讯：查看Wi-Fi连接

（这些权限是必需与我们的服务器进行通信，并启用/禁用离线模式）

＆公牛; 存储：的修改或删除您的外部存储的内容

＆公牛; 存储：阅读您的外部存储的内容

（这些权限是必需的电力仪表和来源日志导出到您的设备）

支持的Android版本：

＆公牛;分4.1（软糖）或以上